CYPRIO Titan
Series Pumps
 |
MUST
be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter)
protected 120 Volt outlet ! |
|
Not for
use in swimming pools or salt water |
|
This item ships from British
Columbia |
September 20,
2006
Not only are your products great
but fast delivery service. Our new submersible pump is in the pond and
working wonderfully. Thank you once again.
Tom and Lynda, Gold Bridge, BC
June 19, 2003
Thanks very
much. The pump (Cyprio Titan), filter (Nursery Pro
UltraKlean 1000 UVC) and hose arrived, and was installed yesterday.
It all works fine ... Thanks again, this is the only way to shop.
Vicki, Port
Alice, BC
June 12, 2003
We received
everything (Titan 800 Pump) just as ordered. We are very very pleased
with your service, keeping us informed and also having just what we were
looking for. Thank you again.
Robert, St.
Albert, AB |
|
| General
Product Information |
Titan pumps
are specifically designed for use in a pond filtration system. A Titan
filter pump should be placed at the deepest point of the pond and at the
opposite end to the filter outlet where it will pull solids into the filter
so they can be easily removed from the water and actually encourage the
growth of beneficial bacteria.
Titan pumps
are designed with a unique shape to maximize debris removal from the bottom
of the pond while promoting maintenance-free operation.
|
Efficiency |
|
Reliability |
|
Ease of
use |
|
High-efficiency
motors |
|
Unidirectional
rotation: Impeller and chamber are designed using computational fluid dynamics
to give extra water, solids flow and less wear without blocking |
|
TRF fuse
shuts the pump down before blockage causes damage |
|
Anti-clog
cage: Very large water intake area will not block easily |
|
No foam
pre-filter: Eliminates need for frequent cleaning |
|
Solids
handling capability up to 3/8" (1/6" with Titan 550 and 800, 1/3" with
Titan 1450 and 2100, 3/8" with Titan 2650, 3500 and 4400) |
|
Side outlet
with multi-size hosetail - hose can be pointed in any direction across
bottom of pond |
|
Hosetail
accommodates hose sizes from 3/4" to 1-1/2" inside dia. |
|
Suitable
for filtration, waterfalls and water courses |
|
3-year
manufacturer's limited warranty (warranty does not cover pump impeller) |
|
Step-down
hosetail - allows attachment of 3/4", 1", 1-1/4", or 1-1/2" tubing - no
additional adapters are required |
|
